Comments for Page: Engine, Muffler & Clutch (Multi-Page)
1. Supplied with the engine.
2. Torque to 41 N•m. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
3. Torque to 61–65 N•m.Replace (do not reuse) the cap screw if it is removed or loosened.
4. Torque to 23 N•m.
5. Part of the wire harness.
FUEL & VAPOR LINE LENGTHS
A: 42 cm VALVE TO ENGINE (FUEL)
B: 81 cm TEE TO ENGINE (VAPOR)
Engine, Muffler & Clutch (Multi-Page)
52" X-ONE Parts Manual - 940056CE - HTX1TS052KAWFX850VC
Thu Feb 18 10:30:28 UTC 2021 6-1
To Next Page
Loading...
