What to do if Hutt Vacuum Cleaner slides downwards during operation?
If your Hutt Vacuum Cleaner slides downwards, it could be due to several reasons. If the rag has too much moisture, absorb it repeatedly with tissue. If the rag is dirty, replace it with a dry and clean one. Alternatively, if the rag is too dry, spray water on it properly.
What to do if Hutt DDC55 is not moving smoothly?
If your Hutt Vacuum Cleaner isn't moving smoothly, replace the rag with a clean one. Also, check the glass for any sticky objects that may be hindering movement.
Why Hutt Vacuum Cleaner machine has a leak?
Your Hutt Vacuum Cleaner may leak if the turntable is not in place or the rag isn't installed evenly. Large-scale air leakage may also occur if the glass or other surfaces to be cleaned are curved or have uneven surfaces such as stickers.
What to do if Hutt DDC55 Vacuum Cleaner does not automatically stop?
If your Hutt Vacuum Cleaner doesn't automatically stop after cleaning the entire window, please directly take down the machine.
What to do in case of accidental power failure of Hutt DDC55 Vacuum Cleaner?
In the event of an accidental power failure with your Hutt Vacuum Cleaner, please take down the machine or restore the power supply as soon as possible.
Explains the function of each button on the remote control for operating the robot.
Warnings for usage in different weather/temperatures and on suitable surfaces.
Key safety measures during operation, charging, and storage.
Solutions for problems like sliding, leaks, and movement issues.
Guidance for unresponsive controls, power failures, and automatic stopping.
General| Type | Window Cleaning Robot |
|---|---|
| Battery Capacity | 650 mAh |
| Navigation System | AI Technology |
| Noise Level | 65 dB |
| Fall Prevention | Yes |
| Automatic Route Planning | Yes |
| Working Time on Full Charge | 80 minutes |
| Charging Time | 2 hours |
To Next Page
