HUUM HIVE - Things to Check Before Installation; Installation; Positioning the Heater

4
THINGS TO CHECK BEFORE INSTALLATION
• Does the output (kW) match the volume (ft/m) of the sauna
room? See Table 1.
• In case there are any uninsulated brick, tile or glass walls in the
sauna room, an additional volume of 53 ft 1.5 m) should be
added to the sauna room for each such square meter of the wall.
• The suitable output of the heater will be determined based on
that volume according to Table 1.
• The producer’s warranty guarantee is invalid if the heater and
sauna room have been dimensioned incorrectly!
• Minimal safe distances between the sauna room’s ceiling and
walls to consider in installing the electric heater are listed in Table
2.
INSTALLATION
Positioning the heater
• The heater must be positioned in such a way that there is a safe
distance between flammable materials and the heater.
• The heater must be installed in a way that prevents people
from having physical contact with the heater or that dangerous
situations could emerge during the heating process.
• The heater holds approximately 550 lb 250 kg) of stones.
• The inputs of the power cable are on the boom cover of the
heater.
Table 1
Output
kW
240V)
Room Elements
kW 240V)
Amps
A
Circuit Brea-
ker
A
Wire
size
AWG
HIVE 6 6 176.6282 ft
3
58 m
3
2 25 30 10
HIVE 9 9 317.8530 ft
3
915 m
3
3 37,5 30 6