Huvitz HIIS-1 - User Manual

Questions and Answers

A
Anthony RogersAug 7, 2025
What to do if I cannot access the Huvitz Server from the HIIS-1 client?
- J
  John HamiltonAug 7, 2025
  If you cannot access the Huvitz HIIS-1 server from the HIIS-1 client, it may be due to networking issues or an incorrect IP address. First, verify that the HIIS-1 server and HIIS-1 clients are on the same network. Second, ensure that the IP address of the HIIS-1 server is entered correctly on the HIIS-1 clients.
A
Amy SmithAug 15, 2025
What to do if no data is transmitted to the Huvitz HIIS-1 server?
- M
  martin16Aug 15, 2025
  If no data is being transmitted to the Huvitz HIIS-1 server, the issue might be related to network connectivity or an incorrect IP address. Check that the Huvitz equipment and the HIIS-1 server are on the same network. Also, verify that the IP address of the HIIS-1 server is entered correctly on the Huvitz equipment.
J
Jeffrey MurrayAug 23, 2025
What to do if no data is displayed on the Huvitz Server?
- B
  Brittany CarpenterAug 23, 2025
  If no data is displayed on the Huvitz HIIS-1 server, it might be caused by a data transfer error. To resolve this, transfer the data to the HIIS-1 server again.
A
Anna WaltonAug 30, 2025
Why does the Huvitz HIIS-1 show a port number duplicated error?
- B
  Billy OneillAug 30, 2025
  The Huvitz HIIS-1 server showing a port number duplicated error is likely because PostgreSql is already installed on your system. When installing HIIS-1, make sure to uncheck PostgreSql during the installation process.