| Step 1 | Review the Packing List: Confirm you have all the necessary parts to complete the installation. If you
are missing any parts, please call HY-C Customer Service @ 800-325-7076 or email: customerservice@hy-c.com.
Do not return the product to the retailer.
| Step 2 | General Instructions: Please refer to the Owners Manual of your appliance, if available. Mantel
clearances are determined by your appliance. If you do not have a copy of the manual, please follow the following
guidelines.
• Non-Combustible materials must extend 8” to 12” above the fireplace opening for the entire width of the
opening. Any combustible materials within this area could be a fire risk.
• The FAH-BLK is adjustable to fit openings of 28” to 48”. CAUTION: Use care when aligning the sections of
the hood to not damage the finish. Layout the three sections on a flat surface to achieve the desired length of
the hood. For the best appearance, be sure to maintain equal sections on the right and left sides of the center
section.
Qty
Description Part #
1 Hood - Left FAHL-BLK
1 Hood - Center FAHC-BLK
1 Hood - Right FAHR-BLK
2 Hood Support for Masonry Applications HSG-BLK
1
Hardware Package: Four (4) 1/2” Non-Masonry Screws, Four (4) 1 - 1/4”
Masonry Screws
FAH-HDW
| Step 3 | Non-Masonry Installations:
[Proceed to STEP 4 for Masonry Applications]
• Align the FAH-BLK with the top of the fireplace opening and mark the location of the three (3) 1” slots on the
underside of the Hood–Left and Hood–Right. There should be six (6) locations marked.
• Select two (2) of the three (3) marks on both the Hood-Left and Hood-Right section that will provide maximum
support for the hood.
Adjustable Fireplace Hood (FAH-BLK)
Instruction Sheet
Homeowner: pleaSe Save tHeSe inStructionS for future reference.
Congratulations on your purchase of a HY-C Adjustable Fireplace Hood. The purpose of this product is to protect
adjacent combustible surfaces from the high heat output associated with fireplaces. It is imperative the product
be properly installed to ensure the safety of your home. Failure to properly install this product may result in the
blistering/discoloration of finishes or wood, damage to items placed above the fireplace, or fire.
The mounting procedure is determined by the appliance, mounting surface, and required clearances to combustible
materials. There are two methods detailed below. Modifications to the steps outlined may be necessary depending
upon your specific installation requirements.
1
FAH-BLK Packing List
To Next Page
Need help?
General