Need help?Do you have a question about the HYDAC ELECTRONIC EDS 3446-F31-0040-000 and is the answer not in the manual?
General| Product Type | Electronic Pressure Switch |
|---|---|
| Model | EDS 3446-F31-0040-000 |
| Housing Material | Stainless steel |
| Protection Class | IP 67 |
| Process connection | G1/4" DIN 3852 |
| Temperature range | -25 ... +85°C |
| Electrical Connection | M12x1 connector |
| Operating Temperature | -25...85 °C |
| Switching element | Transistor output PNP |
| Pressure Range | 0 to 40 bar |
Defines the product's intended application and outlines foreseeable misuse scenarios.
Specifies requirements for personnel performing work on the measuring system.
Explains the IO-Link mode where Pin 4 is a communication pin for parameter changes.
Details parameterisation via IO-Link master and refers to IODD for specific commands.
Details the two switching outputs and their parameterisable switching behaviour (window or two-point mode).
Provides input data, output variables, accuracy, and compensation for ceramic sensor models.
Lists input data, output variables, accuracy, and compensation for thin-film strain gauge models.
Summarizes IO-Link features, communication parameters, and supported data structures.
Explains the model code structure for ceramic sensor versions including technology, connections, and output.
Details the model code structure for thin-film strain gauge versions.
To Next Page
