To Next PageTo Next Page
Need help?Do you have a question about the HYDAC ELECTRONIC EDS 1600 and is the answer not in the manual?
General| Type | Electronic Pressure Switch |
|---|---|
| Protection class | IP 65 |
| Pressure range | 0 to 600 bar |
| Output signal | PNP or NPN |
| Electrical connection | M12 connector, 5-pin |
| Process connection | G1/4 A DIN 3852-E |
| Accuracy | ±1% of full scale |
Details product quality controls, individual calibration, and warranty claims.
Highlights the maintenance-free nature of the EDS 1600 and service contact.
Covers mounting on rubber buffers, hydraulic decoupling, and electrical wiring standards.
Discusses required clearance and advice for reducing electromagnetic interference.
Explains how the EDS 1600 display shows current pressure and set points.
Details the process for setting switching points using potentiometers.
Describes how to adjust the hysteresis or switch-back differential.
Provides physical dimensions and interface details of the EDS 1600.
Illustrates relay and signal output connections and terminal assignments.
Explains the coding system for ordering different configurations of the EDS 1600.
Covers measuring ranges, accuracy, materials, IP rating, and mechanical connection.
Details electrical connections, supply voltage, and current consumption.
Lists sensor data, signal output types, and relay output capabilities.
Lists the items supplied with the EDS 1600 unit.
Describes additional kits and parts available for mounting and adaptation.
