Need help?Do you have a question about the HYDAC ELECTRONIC HMG 3010 and is the answer not in the manual?
General| Accuracy Pressure | ±0.5% FS |
|---|---|
| Accuracy Temperature | ±1 °C |
| Protection class | IP65 |
| Measuring range Pressure | 0 to 600 bar |
| Interface | USB |
| Output signal | Digital |
| Housing material | Aluminum |
Describes the primary measurement and data acquisition capabilities of the HMG 3010.
Details the capabilities for connecting and operating the HMG 3010 via a CAN bus system.
Lists the components included with the HMG 3010 portable data recorder.
Explains the options for powering the HMG 3010, including battery and external sources.
Provides essential safety instructions for the proper and safe operation of the HMG 3010.
Identifies and describes the various buttons and controls on the HMG 3010.
Details the available input/output ports and how to connect sensors and peripherals.
Guides the user through the initial startup process, including language and date/time settings.
Covers configuration options for measurement channels, display, initial setup, and settings administration.
Explains how to start, view, and delete measurement recordings and curves.
Details additional functions such as stopwatch, device information, and software updates.
Describes how to connect, configure, and manage HYDAC SMART sensors with the HMG 3010.
Explains how to connect to and utilize the HMG 3010 with a CAN bus system.
Provides comprehensive specifications for the HMG 3010, including sensor inputs and operating conditions.
Illustrates the pin configurations for various connectors used with the HMG 3010.
To Next Page
