Need help?Do you have a question about the Hydac FluidAqua Mobil FAM 10 Series and is the answer not in the manual?
General| Flow rate | Up to 10 l/min |
|---|---|
| Operating pressure | Max. 8 bar |
| Operating temperature | -20°C to +80°C |
| Pump type | Gear pump |
| Housing Material | Aluminum |
| Filter Element Material | Glass fiber |
| Fluid compatibility | Mineral oils, synthetic oils |
Contact details for product information and technical assistance.
Guidance on how to effectively navigate and find information within the manual.
Outlines essential safety measures for operating the unit.
Specifies the intended use of the FAM and prohibits improper applications.
Instructions on ensuring protective safety devices are installed and functional.
Requirements for personnel training and staff responsibilities.
Warnings and safety procedures related to electrical components and risks.
Procedure for checking the unit for damage upon receipt and unpacking.
Guidelines and precautions for safely moving and transporting the unit.
Details the different versions of the FAM and their features.
Information on the dewatering capabilities and influencing factors.
Identifies and labels the key components of the FAM unit.
Lists the types of fluids compatible with different FAM versions.
Provides dimensional drawings and specifications for the stationary model.
Provides dimensional drawings and specifications for the mobile model.
Explains the operational flow and working principle of the hydraulic system.
Describes the primary uses and operational modes of the FAM.
Guidelines for correctly positioning and preparing the FAM for operation.
Recommendations for connecting hoses and piping to minimize pressure loss.
Steps for filling and preparing the vacuum pump with oil.
Guidance on connecting the FAM to the power supply safely.
Step-by-step procedure for powering on the FAM unit.
Instructions for controlling and managing the FAM during operation.
Overview of the primary functions and controls available on the main menu.
Detailed functions and key assignments for Manual Menu 1.
Steps to diagnose and resolve the "Reactor overfilled" malfunction.
Procedure for replacing the fluid filter element when an error occurs.
Steps to address issues related to pump motor protection tripping.
Diagnosing and resolving the "Dry running, E-pump" error.
Steps to clear blockages in the FAM outlet line.
Steps to diagnose and resolve blockages in the FAM inlet line.
Instructions for replacing the air filter element.
Procedure for changing the vacuum pump oil and filter.
Instructions on how to disassemble and clean the suction strainer.
Detailed steps for changing the fluid filter element.
List of available spare parts with their part numbers.
Guidelines for proper storage conditions and temperature range.
Guidelines for safe and compliant decommissioning and disposal of the unit.
Specifications and technical parameters of the FAM unit.
Explanation of the model code structure and its meaning.
Official declaration of compliance with relevant EU directives and standards.
To Next Page
