Hydac HPT 1000 - Table of Contents

2 HPT 1000 SAE J1939
Edition: 2021-07-13 HYDAC ELECTRONIC GMBH Part no.: 670061
E
Content
1 Introduction ______________________________________________________ 5
1.1 Functions ............................................................................................................ 5
2 Address Claiming _________________________________________________ 5
2.1 General overview ............................................................................................... 5
2.2 Name ................................................................................................................... 5
2.3 Address ............................................................................................................... 6
2.4 Start-up process ................................................................................................. 7
3 Basic principles ___________________________________________________ 7
3.1 General communication characteristics .......................................................... 7
3.2 Display of numeric figures ................................................................................ 7
4 Configuration _____________________________________________________ 8
4.1 General overview ............................................................................................... 8
4.2 Settings ............................................................................................................... 8
4.2.1 List of the settings (Object List "OL") ______________________________ 8
a. Profile_________________________________________________________ 9
b. General _______________________________________________________ 9
c. Name sections _________________________________________________ 9
d. Transmission of measured values _________________________________ 9
e. Measured values display, pressure _______________________________ 10
f. Operation Data ________________________________________________ 10
g. Measured values display, device temperature ______________________ 10
h. Commands ___________________________________________________ 11
4.2.2 Setting of the Baud rate _________________________________________ 11
4.2.3 Settings for measured value transmission _________________________ 11
4.2.4 Settings of measured values display ______________________________ 12
4.2.5 Device mode and device status __________________________________ 13
4.3 Carry out configuration ................................................................................... 14
4.4 Structure of the SAE J1939 29-BIT CAN-ID .................................................... 15
4.4.1 Description PGN 61184 "Proprietary A" ____________________________ 15
4.4.2 CAN-ID Example for configuration communication with sensor address 1 _ 15
4.5 Short description of the configuration message ........................................... 16
4.5.1 Description "ack" (Acknowledge Code) of the configuration message __ 16
4.5.2 Description of the configuration range "value" ______________________ 17