PRODUCT GUIDE
3
Pump Assembly
Apply 2-3 wraps of Teon
tape to the threads as shown.
Tigten the adapter to the pump until
they are snug. Do not over-tighten.
Circulator
Spring Clamp
Circulator Tubing
Tubing Adapter
Pump
Qwik-Lok Adapter
Start by applying Teon tape to the pump
adapters, then assemble the parts as illustrated.
Before pushing the tubing over the barbs of the
pump, tee and circulator, place spring clamps on
both ends of the tubing. Finally, slide the spring
clamps over the barbs to secure the tubing in
place.
To Next Page
Loading...