HeatingandCooling
ThermostatUserManual
INSTRUCTIONS:
Thermostats are widely applied to aquariums, reptile markets, incubators, green houses and
refrigerators, where constant temperature controlling is required (heating and cooling).
MAIN FEATURES:
1. LED display, friendly interface, easy to read, operates and set the parameters.
2. Can choose COOL or HEAT mode.
3. Can switch between °C and °F
MAIN FUNCTIONS AND PARAMETERS:
◆ Temperature controlling range:16~40°C ◆
Temperature measuring range: -40~100°C
◆ Resolution: 0.1°C; Accuracy: ± 1.0°C ◆ Input: 1 NTC sensor
◆ Relay: 10A/220V ◆ Product consumption: ≤ 3W
◆ Input voltage: 110Vac± 15%
◆ Ambient Requirements: Temperature: -10~60°C; Humidity: 20%~85%°C
◆ Control load:≤ 550W/110V
KEYS:
KEY ACTION RESULT STATUS
H/C single press switch between HEAT and COOL mode In normal work status
SET
single press enter into setting mode of DIFF and DELAY In normal work status
single press save and exit In setting status
press 5 sec. switch between °C and °F mode In normal work status
UP single press enter into setting mode of stop temperature In normal work status
UP single press upward adjust the parameter value In setting status
DOWN single press downward adjust the parameter value In setting status
DOWN single press enter into setting mode of stop temperature In normal work status
ICONS:
ICON
MEANING
STATUS
Display Not display Flash
SNOW cool working cool not working / In normal work status
SUN heat working heat not working / In normal work status
COOL cool mode non cool mode / In normal work status
HEAT heat mode non heat mode / In normal work status
DIFF / / DIFF adjustable In setting status
DELAY / / DELAY adjustable In setting status
To Next Page
Need help?
General