Need help?Do you have a question about the HYDROLAB HL Series and is the answer not in the manual?
Explains hazard symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings for safe operation.
Details the importance of instrument labels and symbols for preventing injury or damage during use.
Covers regulatory compliance with Canadian and FCC standards for digital devices, ensuring safe operation.
Lists technical parameters, range, accuracy, resolution, and operating conditions for the sensor.
Describes the sensor's appearance, key components, and general usage context.
Guides through the sensor calibration process, including safety warnings and software references for accurate measurements.
Provides advice on maintaining sensor cleanliness and avoiding contaminants for optimal measurement accuracy.
Details essential maintenance procedures, including sensor cleaning and sensor cartridge replacement steps.
Lists technical specifications, including range, linearity, MDL, and operating parameters for freshwater algae sensors.
Describes the blue-green algae freshwater sensor, its function as an optical fluorometer, and light sensitivity.
Explains how the sensor works by irradiating water with light and measuring the emitted red light from algae.
Details the calibration procedure, emphasizing safety protocols and software usage for accurate readings.
Advises on keeping the sensor clean and avoiding contaminants for optimal performance.
Covers maintenance tasks, including sensor cleaning methods and precautions for sensor longevity.
Lists technical specifications for marine algae sensors, including range, linearity, and operating conditions.
Describes the marine algae sensor, its function, and sensitivity to light for accurate measurements.
Explains the principle of operation for marine algae sensors, involving light emission and measurement.
Outlines the calibration process for marine sensors, including safety precautions and software guidance.
Provides advice on keeping the sensor clean and avoiding specific contaminants for best measurements.
Details sensor maintenance procedures, focusing on cleaning the sensor and replacement parts.
Lists technical specifications for the Chloride sensor, including range, accuracy, resolution, and operating temperature.
Describes the Chloride sensor, its color, and replaceable cartridge, referencing illustrated steps.
Guides through the calibration process for the Chloride sensor, emphasizing safety and software use.
Provides advice on keeping the sensor clean and avoiding contaminants for accurate Chloride measurements.
Details maintenance procedures for the Chloride sensor, focusing on cleaning and replacing the sensor cartridge.
Lists technical specifications for Chlorophyll a sensors, including range, linearity, and operating parameters.
Describes the Chlorophyll a sensor, its function, and sensitivity to light for accurate readings.
Explains how the Chlorophyll a sensor detects chlorophyll by measuring light absorption and emission.
Outlines the calibration process for Chlorophyll a sensors, including safety precautions and software guidance.
Provides advice on keeping the sensor clean and avoiding contaminants for optimal performance.
Details sensor maintenance procedures, focusing on cleaning the sensor and avoiding damage.
Lists technical specifications for the Conductivity sensor, including range, accuracy, resolution, and operating temperature.
Describes the Conductivity sensor and its role in measuring water conductivity.
Guides through the calibration process for the Conductivity sensor, emphasizing safety and software use.
Provides advice on keeping the sensor clean and avoiding contaminants for accurate conductivity measurements.
Details maintenance procedures for the Conductivity sensor, focusing on cleaning.
Lists specifications for depth sensors, including range, accuracy, resolution, and maximum depth ratings.
Briefly describes the depth sensor's location within the sonde and its visibility.
Provides instructions on installing a seal screw for depth sensors, especially for the 25m model, to prevent damage.
Lists accessories related to depth sensors, with a warning about using approved parts.
Lists technical specifications for the Nitrate sensor, including range, accuracy, resolution, and operating conditions.
Describes the Nitrate sensor, its color, replaceable cartridge, and optimal usage conditions.
Guides through the calibration process for the Nitrate sensor, emphasizing safety and software use.
Advises on keeping the sensor clean and avoiding contaminants for accurate Nitrate measurements.
Details maintenance procedures for the Nitrate sensor, focusing on cleaning and replacing the sensor cartridge.
Lists technical specifications for the Hach LDO sensor, including range, accuracy, resolution, and operating temperature.
Describes the Hach LDO sensor and its visual representation.
Guides through the calibration process for the Hach LDO sensor, including safety and software guidance.
Advises on keeping the Hach LDO sensor clean and avoiding contaminants for accurate readings.
Details maintenance procedures for the Hach LDO sensor, including cleaning and sensor cap replacement.
Lists technical specifications for pH sensors, including range, accuracy, resolution, and operating temperature.
Describes the pH sensors (integrated and standard), highlighting their glass bulb fragility and reference sensor usage.
Guides through the calibration process for pH sensors, emphasizing safety and software use.
Advises on keeping the pH sensor clean and avoiding contaminants for accurate pH readings.
Details maintenance procedures for pH sensors, including cleaning and replacing electrolytes/junctions.
Lists technical specifications for pH/ORP sensors, including range, accuracy, and operating parameters.
Describes the pH/ORP sensors, noting similarities to pH sensors with added platinum bands and reference sensor use.
Guides through the calibration process for pH/ORP sensors, emphasizing safety and software use.
Advises on keeping the pH/ORP sensor clean and avoiding contaminants for accurate readings.
Details maintenance procedures for pH/ORP sensors, including cleaning and electrolyte/junction replacement.
Lists specifications for the reference sensor, including maximum depth and operating temperature.
Describes the reference sensor and its visual representation.
Advises on keeping the reference sensor clean and avoiding contaminants for optimal performance.
Details maintenance procedures for the reference sensor, focusing on cleaning and electrolyte/junction replacement.
Lists technical specifications for Rhodamine WT sensors, including range, linearity, and operating parameters.
Describes the Rhodamine WT sensor, its function as an optical fluorometer, and sensitivity to light.
Guides through the calibration process for Rhodamine WT sensors, emphasizing safety and software use.
Advises on keeping the Rhodamine WT sensor clean and avoiding contaminants for accurate readings.
Details maintenance procedures for Rhodamine WT sensors, focusing on cleaning.
Lists technical specifications for the Temperature sensor, including range, accuracy, and operating conditions.
Describes the Temperature sensor and its visual representation.
Advises on keeping the Temperature sensor clean and avoiding contaminants for accurate measurements.
Details maintenance procedures for the Temperature sensor, focusing on cleaning.
Lists technical specifications for the HL4 Turbidity sensor, including method, units, range, and operating temperature.
Describes the HL4 Turbidity sensor, its wiper mechanism, and its availability for the HL4 sonde.
Guides through the calibration process for the HL4 Turbidity sensor, emphasizing safety and software use.
Advises on keeping the HL4 Turbidity sensor clean and avoiding contaminants for accurate readings.
Details maintenance procedures for the HL4 Turbidity sensor, focusing on cleaning and wiper replacement.
Lists technical specifications for the HL7 Turbidity sensor with cleaning brush, including method, range, and operating temperature.
Describes the HL7 Turbidity sensor with cleaning brush, its wiper, and central cleaning brush function.
Guides through the calibration process for the HL7 Turbidity sensor, emphasizing safety and software use.
Advises on keeping the HL7 Turbidity sensor clean and avoiding contaminants for accurate readings.
Details maintenance procedures for the HL7 Turbidity sensor, focusing on cleaning and replacing the wiper/brush.
General| Brand | HYDROLAB |
|---|---|
| Model | HL Series |
| Category | Accessories |
| Language | English |
To Next Page
