Economy Mode: Press this key to toggle between Economy and Normal
operation. The Normal Mode will automatically maintain the water temperature at the
desired set point. If the set point has not been programmed, the temperature will
remain at 95F. The Economy Mode will maintain the water temperature at 20F
below the set point until manually removed from this mode. When the Economy Mode
is used the factory programming is overridden until midnight of the current day. When
the Economy Mode is active, the Economy icon will appear solid in the display
Window. (SEE Page #10 for additional details)
A built-in timer will shut the pump off after 20 minutes of
operation unless done so manually.
will automatically shut off after 2 hours. The Light Icon will appear while the
fiber optics are activated.
B B
Auxiliary 2 Key: If equipped, press this key to turn Pump 3 on. A second
press will turn Pump 3 off.
Auxiliary 3 Key: If equipped, press this key to turn on Fiber Optic
lighting and color wheel. A second press will turn the color wheel off while the light is
still activated. A third press will turn both the light and color wheel off. Fiber Optic
lighting
2
3
SPASIDE CONTROL - Continued
OPTIONAL
ADDITIONAL FEATURES
Inverted Display: The lower display can be inverted for easy viewing inside or outside
the spa. Press and hold the Economy key for 2 seconds to toggle between inverted and
normal display modes.
Panel Lock: It is possible to lock all of the spaside control keys. Press and hold the Pump
1 key for 5 seconds, “LocF” will appear indicating all the keys have been locked. To
unlock keys, simply press and hold the Pump 1 key for 5 seconds until “Uloc” will appear
indicating the spaside has returned to normal operation.
8
Temperature Readout: To change the temperature display from Fahrenheit to
Celsius or visa-versa simply press-and-hold the “Light” button for approx 5 seconds.
To Next Page
Loading...
