EasyManua.ls Logo

Hydrospace S4 Standup - Page 74

Hydrospace S4 Standup
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oil changes
Change the engine oil and filter every 25 h.
Change the engine oil and filter after the break-in time (10 - 12 h) is finished.
Remove the oil tank filler-cap (A, ill. 1).
For sucking oil off an oil exhaust pump, put the suction hose as far as possible
into the oil tank. (B, ill. 2).
Suck the oil off of the oil tank completely, and place into a suitable container.
74 english
CAUTION
Change the engine oil only when the engine is warm.
NOTE
There is a splash shield in the oil tank to avoid a gush.
Make sure the oil suction hose (to remove the oil) passes by the splash shields to
reach the bottom of the oil tank.
ill. 1
A
ill. 2
B
C
ill. 3
D