76 english
CAUTION
Never fill with more than 3.5 l of oil.
Clean the links at the oil tank and exhaust elbow union.
Install all oil and water hoses.
Begin new oil filter application and cover the O-ring in the oil filter.
Before the installation of the oil filter cover, coat the O-ring easily with engine oil (ill. 1).
Install the oil filter cover and tighten only to the prescribed starting torque.
Fill the oil tank with fresh engine oil.
Always use Hydrospace engine oil.
Afterwards, install the spark plugs.
Re-attach all wiring harness plugs.
amount of filling oil tank: min 3.3 l, max 3,5l
oil quality: Hydrospace 10W-60, API SJ or higher
starting torque oil filter cover: 24 Nm
starting torque ignition coils: 10 Nm
starting torque spark plugs: 27 Nm
starting torque hose clamps: 2.4 Nm
Abb. 1
To Next Page
Loading...