Need help?Do you have a question about the Hydrotec HY-MAG DN25 and is the answer not in the manual?
Steps to check and correct undercurrent issues, focusing on connections.
Action for overload failure in the solenoid coil, requiring Hydrotec notification.
Guidance for short circuit in coil circuit, checking connections and foreign particles.
Remedial steps for control box or internal communication faults, including restart.
General| Connection Type | Threaded |
|---|---|
| Operating Pressure | 10 bar |
| Weight | 1.2 kg |
| Application | Water System |
| Nominal Diameter | DN25 |
| Operating Temperature | 90°C |
To Next Page