EasyManuals Logo

HydroTherm KN-2 Installation Instructions

HydroTherm KN-2
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
is manual is intended only for use by a quali ed heating installer/technician. Read and follow this manual, all supplements and related
instructional information provided with the boiler. Install, start and service the boiler only in the sequence and methods given in these
instructions. Failure to do so can result in severe personal injury, death or substantial property damage.
Do not use the boiler during construction. Construction dust and particulate, particularly drywall dust, will cause contamination of
the burner, resulting in possible severe personal injury, death or substantial property damage.  e boiler can only be operated with a dust-
free air supply. Follow the instruction manual procedures to duct air to the boiler air intake. If the boiler has been contaminated by operation
with contaminated air, follow the instruction manual guidelines to clean, repair or replace the boiler if necessary.
A x these instructions near to the boiler/water heater. Instruct the building owner to retain the instructions for future use by a quali ed
service technician, and to follow all guidelines in the User’s Information Manual.
P/N 42-9540 11/12 Copyright 2012 Hydrotherm
Cast iron condensing boilers
Models
KN
-
2 and KN
-
4
Vent/air manual
Installation instructions
for vent and air piping
Also read and follow:
KN Boiler manual
KN Control manual
KN-2/4 VAM2-1012
KN
Series

Other manuals for HydroTherm KN-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HydroTherm KN-2 and is the answer not in the manual?

HydroTherm KN-2 Specifications

General IconGeneral
Frequency60 Hz
Weight180 lbs
Fuel TypeNatural Gas
Voltage120V
Dimensions28" H x 18" W x 24" D

Related product manuals