Need help?Do you have a question about the hyfire HFW-W2W-01 and is the answer not in the manual?
Overview of the Translator Module's purpose and system integration.
Covers module purpose, CE marking, system design, personnel, general info, and device support.
Details how to use the guide, related documents, and essential warnings.
Covers pre-installation criteria and location recommendations.
Procedures for installation, device damage checks, and fault handling.
Guidance on positioning for optimal radio communication and avoiding interference.
Covers back box fixing, wall alignment, mounting procedure, and module dimensions.
Rules for cable installation and detection loop termination.
Introduces the range of wireless devices supported by the Translator Module.
Lists part numbers, graphics, and basic descriptions of supported devices.
Details battery types, DIL switches, and generic device settings.
Specific guidance for sensors and manual call points.
Explains indications and supervision for input/output modules.
Details for Wall Sounders, Sounder Beacons, and Beacons.
Programming voice messages and controlling output for voice sounders.
Explains the module's role in expanding fire detection systems.
Covers system range, features, and technical specifications.
Details wiring, menus, push-buttons, and setup procedures.
Guides on programming wireless devices, loop addressing, and batteries.
Introduces the Expander Module for extending system range and overcoming obstacles.
Lists technical specifications for the Expander Module.
Instructions for connecting monitored and non-monitored PSUs.
Details PCB connections and programming interfaces.
Explains how expanders connect and form clusters.
Covers installing the Wirelex tool and initial system configuration.
Procedures for adding, programming, and managing devices.
Details load process, W2W table, status, faults, and link quality.
Reference table for system configuration codes.
Introduces the Expander Module for extending system range.
Step-by-step guide to adding the first Expander Module.
Methods for adding multiple expanders via daisy chain, same layer, or combination.
Introduces additional software utilities on the Wirelex CD.
Tool for assessing RF environment and selecting channels.
Utility for cloning module configurations to new hardware.
Utility for programming custom voice messages into sounders.
Purpose of service visits for checking system integrity and updates.
Procedure for connecting a laptop to read Translator Module properties.
Steps for replacing or re-initializing faulty or changed field devices.
General| Brand | hyfire |
|---|---|
| Model | HFW-W2W-01 |
| Category | Wireless modules |
| Language | English |
To Next Page