Page 2
(2) Wire Grids 15” x 45”
Parts Included
(4) Lag Screws 5/16” x 2-1/2”
(1) Wire Grid 13” x 45” (2) Support Bar Assemblies
Use 1/2”
Wrench
(4) Carriage Bolts
1/4” x 2”
(4) Carriage Bolts
#6 x 1”
(4) #6 Washers (2) Plastic Tie Straps
(4) 1/4” Flange Nut
(4) #6 Hex Nuts
Use 7/16”
Wrench
Use 5/16”
Wrench
HyLoft Sticker
(1) 5/16”, (2) 7/16” & (1) 1/2”
Wrench, Socket Wrench
or Nut Driver
Stud/Joist
Finder
(optional)
Level
Pencil
Eye Protection
Tape Measure Ladder
or Step Stool
Ceiling
Joists
24” to 36”
apart
3/16”
Drill Bit
Power
Drill
OR
Tools Required:
ASSEMBLY INSTRUCTIONS
45” x 45” Ceiling Storage Unit
IMPORTANT: Read through entire instructions before beginning any installation.
MISSING A PART?
There is no need to return this item to the store.
Instead call our TOLL FREE HOTLINE:
1-800-253-1561
Item #: 00540, 00541, 00542, 00625 & 00626
Adjust to t joist spacing
To Next Page
Loading...