hymer ERIBA Clothes line - User Manual

ERIBA Clothes line
In purchasing the ERIBA clothes line, you have decided in favour of a genuine quality product.
It’s child’s play to mount and operate, and a long service life is guaranteed.
However, we recommend that you read through these brief instructions carefully and take note of
the few, but important, points.
Note: The pictures in these operation instructions may differ from the original.
Important information
Please read the following information carefully before using the clothes line. This product is
intended for drying items of laundry. These brief instructions must be carried permanently in the
vehicle (e.g. with the other vehicle papers). Always pass on these brief instructions together with
the product (e.g. when hiring or selling).
No road traffic regulations approval!
Before the start of your journey, you must disassemble the clothes line!
Stepping on the line is forbidden!
Stepping or climbing onto the washing line is not permitted. Risk of injury / destruction of the
clothes line!
The permitted load-bearing capacity of 10kg (5kg per holder) must not be exceeded!
Load-
bearing
capacity
10kg!

Summary

Important Information and Safety

Road Safety and Disassembly

Product requires disassembly before travel; no road traffic approval.

Usage Restrictions and Load Limits

Prohibits stepping on the line and exceeding the 10kg load capacity.

Product Overview and Basic Assembly

ERIBA Clothes Line Components

Identifies key parts like star handle, groove, retaining bracket, and clothes line holder.

Attaching the Holder to Caravan Rail

Mounts the holder onto the caravan's outside rail.

Securing Holder with Star Handle

Swings bracket upwards and fits star handle into the groove.

Advanced Assembly and Usage

Tightening the Star Handle

Turn star handle by hand to firmly secure clothes line holders.

Installing and Securing Washing Line

Thread line through drill holes and secure ends with knots.

Adjusting Line Tension

Adjust line tension by moving holders along the outside rail.

Theft Protection Measures

Use a padlock in drill holes to prevent theft of the clothes line.

Assembly on Round Rails, Disassembly, and Warranty

Round Rail Assembly Requirements

Requires round outside rail holding bracket (item 2483629).

Attaching Holder with Round Bracket

Connects holder to round outside rail via bracket.

Disassembly Procedure

Disassemble by following assembly steps in reverse order.

Warranty Expiration Conditions

Warranty void if load capacity exceeded or used for unintended purposes.

hymer ERIBA Clothes line Specifications

General

Brand	hymer
Model	ERIBA Clothes line
Category	Automobile Accessories
Language	English