HYOSUNG SF 50 User Manual

1
IMPORTANT
BREAK-IN INFORMATION FOR
YOUR MOTORCYCLE
The first 1,000km(600miles) are the most impor-
tant in the life of your motorcycle .
Proper break-in operation during this time will
help ensure maximum life and performance from
your new motorcycle.
Hyosung parts are manufactured of high quality
materials, and manufactured parts are finished to
close tolerances. Proper break-in operation
allows the machined surfaces to polish each
other and mate smoothly.
Motorcycle reliability and performance depend
on special care and restraint exercised during
the break-in period. It is especially important that
you avoid operating the engine in a manner
which could expose the engine parts to exces-
sive heat.
Please refer to the BREAK-IN section for specific
break-in recommendations.
NOTE: This provides special information to
make maintenance easier or important instruc-
tions clearer.
The personal safety of the rider may be
involved. Disregarding this information
could result in injury to the rider.
WARNING
WARNING/CAUTION/NOTE
Please read this manual and follow its instruc-
tions carefully. To emphasize special informa-
tion the words WARNING, CAUTION and NOTE
carry special meanings and should be carefully
reviewed.
These instructions point out special
service procedures or precautions
that must be followed to avoid damag-
ing the machine.
CAUTION

HYOSUNG SF 50 Specifications

General

Brand	HYOSUNG
Model	SF 50
Category	Scooter
Language	English

Summary

Important Information

Break-in Information for Your Motorcycle

Crucial initial period for engine longevity and performance.

Warning, Caution, and Note Symbols

Explains the meaning of safety and operational alert symbols.

Consumer Information

Accessory Installation and Safety Tips

Safe Riding Recommendations

Essential advice for safe motorcycle operation and rider behavior.

Controls

Instrument Panel Functions

Describes the gauges and indicators on the instrument panel.

Ignition Switch Operation

Handlebar Switches (Horn, Turn Signal, Lights)

Starter Switch Operation

Gasoline and Engine Oil

Refueling Procedure

Steps and safety precautions for adding gasoline to the fuel tank.

Supplying Engine Oil

Instructions and warnings for checking and refilling engine oil.

Proper Operations

Starting the Engine

Procedures for starting the engine, including pre-ride checks.

Kick Starting the Engine

Starting Off from Standstill

Steps to safely move the motorcycle from a stopped position.

Adjusting Speed with Throttle Grip

How to control acceleration and deceleration using the throttle.

Operating the Brakes

Guidelines for applying front and rear brakes effectively and safely.

Stopping and Parking

Procedures for safely stopping the motorcycle and parking it.

Breaking-in Procedure

Critical guidelines for the initial break-in period of the motorcycle.

Inspection Before Riding

Brake System Inspection

Checks for brake levers, fluid level, and hoses before riding.

Tire Inspection (Pressure)

Verifying the correct tire pressure for safe operation.

Tire Inspection (Condition and Tread)

Checking tires for cracks, cuts, foreign material, and tread depth.

Gasoline and Engine Oil Levels

Ensuring sufficient fuel and engine oil levels before riding.

Lights, Mirrors, and Reflector Check

Warnings and Maintenance

Noise Control System Tampering Prohibition

Engine Maintenance for Noise Control