WARNING: Inspect the BMX Scooter frequently. Failure to inspect the BMX Scooter and to make
repairs or adjustments, as necessary can result in injury to the rider or to others. Make sure all
parts are correctly assembled and adjusted as written in this manual and any "Special Instructions".
Immediately replace any damaged, missing, or badly worn parts.
Make sure all fasteners are correctly tightened as written in this manual and any "Special Instructions".
Parts that are not tight enough can be lost or operate poorly. Overtightened parts can be damaged.
Make sure any replacement fasteners are the correct size and type.
If your frame is aluminum, inspect the BMX Scooter frame carefully and frequently. Aluminum frames
can develop very small cracks due to stress, severe shocks, etc. If you see any small cracks, stop riding
the BMX Scooter. Have the frame inspected by a qualified professional at a bicycle service shop before
riding the BMX Scooter again.
NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the
correct tools or if the instructions in this manual or any "Special Instructions" are not sufficient for you.
Repair and Service
P A G E
27
ADJUSTMENT
BMX Scooter
ASSEMBLY
To Next Page
Loading...