QUICK START GUIDE
Changing attachments
Choose desired head attachment and
insert directly into the shaft/opening while
pushing firmly and slightly twisting.
3
Recharging
Only use the provided Hyperice wall
charger to uphold warranty. Full charge
is indicated when the LED band on the
handle stops flashing and becomes
solid green.
4
Caring for your 'GO'
Make sure the power is OFF and the
battery charger is not attached. Use a
damp, clean, cloth and gently wipe your
Hypervolt GO. Store in a clean, cool place
when not in use.
5
To Next Page
Loading...
