1
Setting Up the SupaRetroN
®
HD via HD Cable (FIG.2)
POWER
ON/OFF
CONTROLLER
PORT 1
MICRO USB PORT
OUTPUT PORT
AV PORT
ASPECT RATIO SWITCH
NTSC/PAL SWITCH
FIG. 1
FIG. 2
FIG. 3
CONTROLLER
PORT 2
Thank you for purchasing the SupaRetroN® HD Gaming System. For your safety, and the
safety of others, please carefully read the instruction manual before using this product.
1. Insert the HD cable into the OUTPUT PORT on the SupaRetroN® HD.
2. Insert the other end of the HD cable into the HD input on your HDTV.
3. Insert the MICRO USB CABLE into the MICRO USB PORT on the SupaRetroN® HD.
4. Insert the other end of the MICRO USB CABLE into a power source. If AC adapter
is not included, we strongly advise you use a 5 Volt 1 Amp USB wall AC adapter.
5. Plug the AC adapter into a power outlet.
Setting Up the SupaRetroN
®
HD
CARTRIDGE SLOT
RESET
EJECT
MICRO-USB
OUTPUT
16:9 4:3
To Next Page
Loading...
