Field Service Bulletin 9
HyPro2000 — HT2000 TORCH UPGRADE
b. Connect the green and red coolant hoses to the fi tting on the torch quick-disconnect receptacle with the
corresponding color.
c. Connect the cap senor lead, the plasma gas hose, and the shield gas/pilot arc lead to the torch
quick-disconnect assembly.
8. Slide the pilot arc lead insulator over the blue shield gas/pilot arc lead until it contacts the bottom of the torch
quick-disconnect receptacle.
Coolant hoses
Plasma gas hose
Cap sensor leadShield gas hose/pilot arc lead
Pilot arc lead insulator
Torch
quick-disconnect
receptacle
To Next Page
Loading...