Charging
It is recommended to fully charge your mouse before rst use.
DPI Presets
There are 7 default DPI presets: 400 DPI (red) | 800 DPI (blue) |
1600 DPI (yellow) | 2400 DPI (purple) | 3200 DPI (green) |
6400 DPI (cyan) | 16000 DPI (white)
Polling Rate
There are 4 default polling rate presets: 125Hz (green) |
250Hz (blue) | 500Hz (orange) | 1000Hz (red)
Installation
Wireless Mode
1. Connect the wireless receiver to the wireless adapter.
2. Connect the wireless adapter to a PC using the included USB cable
3. Hold the Power button until green light appears
For optimal placement, keep the wireless receiver within 20cm of the mouse.
Wired Mode
Connect the mouse to a PC using the included USB cable.
To Next Page
Loading...
Need help?
General
