
Do you have a question about the HyperX Pulsefire Dart HX-MC006B and is the answer not in the manual?
| Sensor | Pixart 3389 |
|---|---|
| Polling Rate | 1000 Hz |
| Buttons | 6 |
| Weight | 110g |
| Cable Type | Braided |
| Cable Length | 1.8m |
| Speed | 400 IPS |
| Acceleration | 50 G |
| RGB Lighting | Yes |
| Compatibility | PC, PS4, PS5 |
| DPI | Up to 16, 000 |
| Connectivity | Wireless / Wired |
| Battery Life | up to 50 hours |
Connect the USB receiver and USB-C to USB-A extension cable to a PC USB port.
Connect the USB-C to USB-A extension cable to your mouse and a PC USB port.
Place the mouse on a compatible wireless charging base.
Connect the USB-C cable to the mouse and a PC USB port for charging.










Loading...