MAINTENANCE
79
WARNING
Do not try to install a fork without a lifting device.
Each hook fork for these lift trucks can weigh 66 kg to
183 kg (145 to 402 lb).
Hook Fork (Installation). Move the fork and carriage so
that the top hook on the fork can engage the upper car-
riage bar. Raise the carriage to move the lower hook
through the fork removal notch. See FIGURE 16. Slide the
fork toward its position on the side of the carriage so that
both upper and lower hooks engage the carriage. Engage
the lock pin with a notch in the upper carriage bar .
FIGURE 15. HOOK FORK REMOVAL
1
3
2
1. CARRIAGE BARS
2. HOOK FORK
3. BLOCKS
Property of American Airlines
To Next Page
Loading...
