Need help?Do you have a question about the Hyster C219 and is the answer not in the manual?
General| Model | C219 |
|---|---|
| Category | Forklifts |
| Transmission Type | Powershift |
| Tire Type | Pneumatic |
| Load Capacity | 2000 kg |
| Lift Height | 4.5 m |
| Overall Length | 2.8 m |
| Overall Width | 1.2 m |
| Mast Height (Lowered) | 2.1 m |
| Weight | 3200 kg |
Outlines essential safety precautions for maintaining and repairing the forklift, including lifting and personal protection.
Defines the meaning of WARNING and CAUTION symbols and words used in the manual.
Explains the development and purpose of the Common Control System (CCS).
Details the components of the dash display: keypad, LED lights, and LCD screen.
Provides step-by-step instructions for accessing the dash display menu system.
Explains how to navigate through menus and adjust settings using the dash display buttons.
Describes how the CCS software is accessed for truck functions via the dash display.
Defines "Node" and lists designations for control devices within the lift truck.
Explains the base menu structure and how password rights affect access to menu items.
Explains the H1 Truck Hours meter function and its data accumulation.
Explains the H2 Traction Hours meter function and its data accumulation.
Explains the H3 Pump Hours meter function and its data accumulation.
Explains the H4 Steer Hours meter function and its data accumulation.
Explains the H5 Odometer Hours meter function and its data accumulation.
Explains the H10 Display Hours meter function and its data accumulation.
Explains the H30 Traction Node Hours meter function and its data accumulation.
Explains the H41 Slave Traction Node Hours meter function and its data accumulation.
Explains the H50 Pump Node Hours meter function and its data accumulation.
Details the parameters for configuring Performance Level 1.
Sets the maximum forward travel speed of the lift truck.
Sets the maximum reverse travel speed of the lift truck.
Adjusts traction acceleration from maximum to minimum.
Adjusts maximum braking rate when entering plugging mode.
Adjusts maximum braking rate when the control handle is in neutral.
Adjusts the mast lift speed from maximum to lower.
Adjusts the mast lower speed from maximum to lower.
Adjusts hydraulic pump motor acceleration during lifting.
Adjusts hydraulic pump motor deceleration during lifting.
Adjusts solenoid acceleration while lowering.
Adjusts solenoid deceleration while lowering.
Adjusts tilt speed when the mast is elevated above free lift.
Adjusts maximum tilt speed when the mast is raised above free-lift.
Adjusts the rate of tilt speed acceleration.
Adjusts the rate of tilt speed deceleration.
Adjusts the maximum sideshift speed.
Adjusts the maximum 4th Function In speed.
Adjusts the maximum 4th Function Out speed.
Adjusts maximum sideshift speed when mast is above freelift.
Describes the process for adding new operator passwords to the system.
Describes the process for deleting existing operator or supervisor passwords.
Describes the process for editing existing operator passwords.
Allows enabling or disabling the operator password feature.
Provides the function to clear all stored information from the operator log.
Explains the creation and visibility of operator logs.
Shows the number of hours a selected operator has used the truck.
Displays the model of the lift truck for informational purposes.
Displays the serial number of the lift truck for informational purposes.
Displays the voltage of the lift truck for informational purposes.
Indicates the current software version of the truck.
To Next Page