Table 1. Maintenance Schedule (Continued)
Item
8 hr
or 1 day
350 hr
or 2
month
2000 hr
or 1 year
Procedure or
Quantity
Specification
No. Description
Hang-on SS L 3 Lube Fittings
Integral SS
6
L 4 Lube Fittings
9 Load Wheel Bearings
Single L 2 Lube Fittings Multipurpose
Grease
1
Tandem L 4 Lube Fittings Multipurpose
Grease
1
L
7
Clean and Repack Multipurpose
Grease
1
2 Hose Sheaves and
Wire Sheaves
L Check Condition
Clean and Lubricate
SAE 20W or 30W
Motor Oil
14 Drive Tire Wheel
Bolt Torque
X Tighten if Required 200 N•m (148 lbf ft)
13 Drive Unit Gear Oil X C 1.75 liter (1.85 qt) SAE 80W-90
EP Gear Oil
1
Multipurpose #2 grease with 2 to 4% molybdenum disulfide for normal operations.
2
Chain Scale-Hyster-0871796
3
Equalization Charge approximately each month but not more than each week.
4
Visual check for damage and proper adjustment.
5
ISO 46 or Equivalent
6
W20/30RA ONLY
7
W25/30/40ZC ONLY
X=Check C=Change L=Lubricate
Maintenance Schedule 8000 SRM 1027
14
To Next Page
Loading...
Need help?
General
