Need help?Do you have a question about the Hyster RS45-27CH and is the answer not in the manual?
General| Model | RS45-27CH |
|---|---|
| Category | ReachStacker |
| Manufacturer | Hyster |
| Power Type | Diesel |
| Mast Type | Telescopic |
| Tire Type | Pneumatic |
| Lift Height | 15.24 meters |
| Engine | Cummins QSL9 |
| Transmission | Dana TE32 or Dana TE305 |
| Engine Model | QSL9 |
| Engine Displacement | 8.9 liters |
| Fork Length | Not applicable |
| Travel Speed (Loaded/Unloaded) | 25 km/h / 25 km/h |
General safety guidelines for maintaining and repairing equipment, including warnings and cautions.
Lists series codes and corresponding model designations for Europe and America.
Describes the cab frame as a welded structure and its relation to the overhead guard.
Identifies key components of the operator's cab through a labeled diagram.
Steps for removing and installing the main cab door.
Instructions for removing and installing the door hinges.
Procedure for removing and installing the interior and exterior door handles.
Steps to remove and install the door latch mechanism.
Detailed steps for removing and installing the brake and inching pedal assembly.
Guide for removing and installing the accelerator pedal and its associated sensors.
Instructions for removing and installing the operator's seat.
Steps to remove and install the seat cushion.
Procedure for removing and installing the seat back cushion.
Steps for replacing the boot on the seat suspension.
Guide for removing and installing the seat suspension unit.
Detailed steps for replacing suspension scissor and shock absorber components.
To Next Page