1
Product Overview
Product Layout
Front Panel
Rear Panel
Palm Microphone
Programmable Keys
You can request your dealer to program the Emergency key,
Answer key, and End key as shortcuts to assignable radio
features.
Installation
Precautions
Before installation, read the following guidelines carefully:
●
Before installation, ensure that the vehicle power supply
has a negative ground with the voltage of 13.6±15% V.
●
Before installation, measure the length of screws
protruding from the radio surface. During installation,
drill the holes on the vehicle according to the screw
length to avoid damaging the vehicle wires or other
components.
●
Use the antenna and power cord approved by the
Company.
●
Use the mounting bracket approved by the Company.
Otherwise, the accidental drop of the radio may injure
people in the vehicle.
●
Install the radio at a position where you can easily reach
the front panel.
●
To facilitate wiring, keep sufcient space at the back of
the radio.
●
When replacing the fuse for the DC power cord, ensure
the new fuse shares the same specication with the old
one.
●
If any other communication devices such as repeaters
are in the vicinity of the radio, keep the antenna of these
devices at least 10 meters away from that of the radio.
Tools
●
electric drill
●
Phillips screwdriver
●
T20 torx screwdriver
To Next Page
Loading...
Need help?
General
