GENESIS COUPE(BK) > 2010 > G 3.8 DOHC > Body (Interior and Exterior)
Body (Interior and Exterior) > General Information > Specifications
Specifications
Hood Type Rear hinged, gas lifter type
Door Construction Front hinged, Frameless door construction
Regulator system Wire drum type
Locking system Pin-fork system
Trunk Lid Type Gas rifter type
Seat Belts Front 3 point type with Emergency Locking Retractor (E.L.R)
Rear 3 point type with Emergency Locking Retractor (E.L.R)
Tightening Torques
Items N.m Kgf.m Lb-ft
Trunk Trunk lid latch 16.7~21.6 1.7~2.2 12.3~15.9
Front doors Door hinge to body 34.3~41.2 3.5~4.2 25.3~30.4
Door hinge to door 7.8~19.6 1.0~2.0 7.2~14.5
Door striker 16.7~21.6 1.7~2.2 12.3~15.9
Checker to body 16.7~21.6 1.7~2.2 12.3~15.9
Checker to door 6.9~10.8 0.7~1.1 5.1~8.0
Seat Front seat mounting bolts 34.3~53.9 3.5~5.5 25.3~39.8
Rear seat mounting bolts 39.2~53.9 3.5~5.5 25.3~39.8
Seat belt Front seat belt buckle mounting bolt 39.2~53.9 4.0~5.5 28.9~39.8
Front seat belt retractor mounting bolt 39.2~53.9 4.0~5.5 28.9~39.8
Front seat belt lower anchor 39.2~53.9 4.0~5.5 28.9~39.8
Front seat belt upper anchor 39.2~53.9 4.0~5.5 28.9~39.8
Rear seat belt anchor attaching bolt 39.2~53.9 4.0~5.5 28.9~39.8
Rear seat belt retractor mounting bolt 39.2~53.9 4.0~5.5 28.9~39.8
Body (Interior and Exterior) > General Information > Special Service Tools
Special Service Tools
Tool (Number and name) Illustration Use
09793-21000
Door hinge adjusting wrench
Adjustment, removal and installation of
the door hinge