What to do if there is no spark at the spark plug of my Hyundai Chainsaw?
If there is no spark at the spark plug of your Hyundai Chainsaw, the spark gap might be incorrect and needs adjustment to 0.6 to 0.7 mm. The spark plug may be covered with carbon or fouled with fuel, requiring cleaning or replacement. The spark plug itself could also be defective and need replacement.
What to do if the silencer of my Hyundai 35520 is wet with fuel?
If the silencer of your Hyundai Chainsaw is wet with fuel, the fuel mixture might be too rich. Try opening the choke. Also, the air filter may need cleaning or replacement, or the carburetor may require adjustment.
Requirements for the operator's physical and mental condition to use the chainsaw safely.
Mandatory personal protective equipment (PPE) required for safe chainsaw operation.
Essential safety measures to prevent and mitigate dangerous kickback incidents.
Symbols indicating severe hazards that could result in death or serious injury.
Step-by-step guide for correctly mounting the guide bar and saw chain.
Procedures for starting the chainsaw, covering both cold and warm engine conditions.
Techniques and safety precautions for felling trees with the chainsaw.
Common operational issues and their corresponding remedies for troubleshooting.
Detailed guide on the correct angles and techniques for sharpening the saw chain.
To Next Page
General
