34
Whenever you set a Home or favorite location “Favorite 1~5” ,
your point is manually added from the “SELECT FAVORITE”.
Switch the screen to search for points. When you display the
map for a certain point after searching for it, you can touch
“ADD” to add that point to the favorite location.
Note
If you have already set up your favorite location, you can edit
either of them by simply touching the button with the name on
it.
Technical support
Cannot identify the current location. (GPS not receiving)
GPS navigation will not operate indoors, underground, and within structures (e.g. parking
garage). A clear view of the sky must be maintained for operation.
When initially connecting the GPS, it usually takes about 10 minutes to acquire a GPS
signal and begin operation, but the connection speed can differ depending on the weather
condition and surrounding obstacles.
If the GPS connection is unstable for a long period of time, try the following.
• Ensure that the vehicle is positioned in a location where is has a clear and unobstructed
view of the sky.
• If there are high buildings or if you are under a tree, move to a location where there
aren’t any obstacles.
• Check the GPS receiving condition from the GPS menu.
Cannot hear the voice guide.
Ensure that the voice guidance has not been muted on the display screen.
Ensure that the navigation audio volume level under the “SETUP” menu is set to an
appropriate level.
There is a difference between the driving road and the road on the
map in the product.
Even though GPS is usually very accurate, it has an error range.
When GPS receiver is installed, there can be an error of about 5 to 15m.
But for newly constructed roads, the problem could be from the data update to the map.
Cannot see the map.
Perhaps you cannot see the map even when you have executed the navigation menu.
This happens when the data within the memory is damaged. Newly install the data again.
If the issue persists after the installation, contact your dealer.
To Next Page
Loading...
Need help?
General
