Why is my Hyundai TV Receiver remote not working?
If your Hyundai TV Receiver isn't responding to the remote control, ensure the receiver is plugged in and turned on. Make sure you are aiming the remote directly at the front panel of the receiver, and that nothing is blocking the front panel. Also, verify that the batteries are correctly inserted and not exhausted; replace them if necessary.
What to do if my Hyundai TV Receiver says 'No signal found'?
If your Hyundai TV Receiver displays a 'No signal found' message, start by checking the aerial lead and the aerial itself to ensure they are properly connected. Keep in mind that the aerial could be damaged or misaligned. If everything appears to be connected correctly, you may be out of the digital signal area; check with your dealer to confirm.
How to reset the channel lock code on my Hyundai TV Receiver?
If you've forgotten the channel lock code for your Hyundai TV Receiver, the only solution is to re-install the channels. This process will cancel the channel lock.
What does 'scrambled channel message' mean on my Hyundai TV Receiver?
If your Hyundai TV Receiver shows a scrambled channel message, it means the channel you're trying to watch is scrambled. Simply select an alternative channel.
Why is there no picture or sound on my Hyundai TV Receiver?
If you are getting no picture or sound on your Hyundai TV Receiver, make sure the Scart interface is securely connected between the receiver and the TV set. If it is, try reinserting it. Also, ensure that you haven't accidentally tuned to a digital teletext channel; if so, retune to another channel.
How to fix mosaic blocks on my Hyundai TV Receiver?
If you see mosaic blocks in the picture or the picture freezes on your Hyundai TV Receiver, the aerial may not be compatible. Check the aerial.
How to fix Hyundai TV Receiver when standby light is not lit?
If the standby light is not lit on your Hyundai TV Receiver, check that the mains lead is plugged in properly and that the mains fuse is intact. Replace the fuse if necessary.
What to do if my Hyundai TV Receiver can't find digital reception after moving rooms?
If you can't receive digital reception on your Hyundai TV Receiver after moving it to another room, the aerial feed may be going through a distribution system, which reduces the digital signal. Try using a direct feed from the antenna.
Essential guidelines to prevent hazards like shock, fire, and damage.
Details the function of each button on the remote control.
Steps for setting country, language, and scanning channels.
System settings for installation, languages, and channels.
Managing time zones and performing auto/manual scans.
Adjusting TV format, mode, transparency, and banner display.
Picture quality settings and password-based locks.
Solutions for common issues like no signal or picture.
General| Brand | Hyundai |
|---|---|
| Model | DVBT 150 U |
| Category | TV Receiver |
| Language | English |
To Next Page