EasyManuals Logo

Hyundai Elantra GT 2018 User Manual

Hyundai Elantra GT 2018
478 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #384 background imageLoading...
Page #384 background image
7-23
7
Maintenance
EENNGGIINNEE CCOOOOLLAANNTT
The high-pressure cooling system
has a reservoir filled with year-round
antifreeze coolant. The reservoir is
filled at the factory.
Check the antifreeze protection and
coolant level at least once a year, at
the beginning of the winter season
and before traveling to a colder cli-
mate.
Checking the Engine Coolant
Level
Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between the F and the L marks on
the side of the coolant reservoir
when the engine is cool.
If the coolant level is low, add enough
distilled (deionized) water to bring the
level to the F mark, but do not overfill.
If frequent additions are required, see
an authorized HYUNDAI dealer for a
cooling system inspection.
Recommended engine coolant
When adding coolant, use only dis-
tilled (deionized) water for your
vehicle and never mix hard water in
the coolant filled at the factory.
An improper coolant mixture can
result in severe malfunction or
engine damage.
The engine in your vehicle has alu-
minum engine parts and must be
protected by an ethylene-glycol
with phosphate based coolant to
prevent corrosion and freezing.
Do not use alcohol or methanol
coolant or mix them with the spec-
ified coolant.
OPD076011
OPD077091L
1.6 T-GDI
2.0 GDI

Table of Contents

Other manuals for Hyundai Elantra GT 2018

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hyundai Elantra GT 2018 and is the answer not in the manual?

Hyundai Elantra GT 2018 Specifications

General IconGeneral
BrandHyundai
ModelElantra GT 2018
CategoryAutomobile
LanguageEnglish

Related product manuals