9-76
Maintenance
OAI3089063

îš„
Outside lamp
OAI3089064
1. Open the trunk.
2. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
Remove the rear combination light
assembly from the body of the
vehicle.
OAI3089070

îš„
Inside lamp
1. Open the trunk.
2. Loosen the retaining screw of the
trunk lid cover and then remove the
cover.
OAI3089068
OAI3089069
[1]: Back up light
[2]: Rear turn signal light
[3]: Stop light
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
5. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
To Next Page
Loading...
Need help?
General
