EasyManua.ls Logo

Hyundai HL930A - Troubleshooting Guide; Engine

Hyundai HL930A
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. ENGINE
This guide is not intended to cover every conditions, however many of the more common possibilities
are listed.
Trouble Service Remark
Engine oil pressure lamp fails to go off
immediately after the engine is started.
• Add the oil to the specified level.
• Replace the oil filter.
• Check oil leakage from the tube or the
joint.
Steam is emitted from the top part of the
radiator (the pressure valve).
Engine coolant temperature gauge indi-
cates red range.
• Supply the cooling water and check leak-
age.
• Adjust fan belt tension.
• Wash out inside of cooling system.
• Clean or repair the radiator fin.
• Check the thermostat.
• Check the engine coolant temperature
gauge.
• Tighten the radiator cap firmly or replace
the gasket of it.
Engine does not start when the starting
motor is turned over.
• Add fuel.
• Repair where air is inhaled into fuel sys-
tem.
• Check the injection pump or the nozzle.
• In cold weather, check if fuel warmer sys-
tem is working normal. Refer to the pages 4-3.
• Check the valve clearance.
Exhaust gas is white or blue. • Adjust to specified oil quantity.
• Replace with specified fuel.
Exhaust gas occasionally turns black. • Clean or replace the air cleaner element.
• Check the nozzle.
• Check engine compression pressure.
• Check or replace the turbocharger.
Combustion noise occasionally changes
to breathing sound.
• Check the nozzle.
• Check the injection pump.
Unusual combustion noise or mechani-
cal noise.
• Check with specified fuel.
• Check overheating.
• Check the muffler.
• Adjust valve clearance.
TROUBLESHOOTING GUIDE
7-1

Other manuals for Hyundai HL930A