EasyManua.ls Logo

Hyundai HL930A - Page 58

Hyundai HL930A
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5) REMOTE CONTROL VALVE
Item Specification
Type Joystick (or with aux lever)
Control pressure
Minimum
3.7 kgf/cm
2
(52.6 psi)
Maximum
30 kgf/cm
2
(427 psi)
6) CYLINDER
Item Specification
Boom cylinder Bore dia x Rod dia x Stroke ø 110 x ø 65 x 750 mm
Bucket cylinder (HL930A) Bore dia x Rod dia x Stroke ø 110 x ø 65 x 510 mm
Bucket cylinder (HL930A XT) Bore dia x Rod dia x Stroke ø 110 x ø 65 x 515 mm
Steering cylinder Bore dia x Rod dia x Stroke ø 60 x ø 35 x 412 mm
7) DYNAMIC POWER TRANSMISSION DEVICES
Item Specification
Torque converter
Model ZF 4WG130
Type Single-stage, single-phase
Ratio 2.302 : 1
Transmission
Type Full-automatic power shift
Gear shift Forward fourth gear, reverse third gear
Control Electrical single lever type, kick-down system
Pump rated fl ow 85 ℓ /min (22.5 U.S.gpm) at 2000 rpm
Axle
Drive devices 4-wheel drive
Front Front fixed location
Rear Oscillation ± 11° of center pin-loaded
Wheels Tires 17.5 R25, ★★, L3
Brakes
Travel Four-wheel, wet-disc type, full hydraulic
Parking
Spring applied, hydraulic released brake on transmis-
sion
Steering
Type Full hydraulic, articulated
Steering angle 40° to both right and left angle, respectively
2-8

Other manuals for Hyundai HL930A