Hyundai Tazza - User Manual

Questions and Answers

E
Elizabeth RamosAug 7, 2025
Why is my Hyundai Tazza Coffee Maker leaking water from the filter?
- P
  Patrick SmithAug 8, 2025
  If water leaks from the outer side of the filter in your Hyundai Coffee Maker, it could be due to a few reasons. First, check for any coffee powder on the filter edge and remove it. Second, make sure the portafilter is correctly installed and locked in place. Finally, if you've just finished milk foaming or steam generation and the steam button hasn't reset due to high temperature, allow the unit to cool down before operating.
D
denise11Aug 15, 2025
How to fix steam that is not frothing on Hyundai Tazza?
- R
  Robert MilesAug 15, 2025
  If the steam isn't frothing in your Hyundai Coffee Maker, ensure the steam button indicator is solid green before use. Try using a high, narrow container and whole or half-skimmed milk. Also, check the steam nozzle for any dirt and clean it with a wet sponge after each use.
N
Natasha WalkerAug 22, 2025
Why does my Hyundai Tazza Coffee Maker Espresso taste like acid?
- L
  Lisa DavisAug 22, 2025
  If your espresso from the Hyundai Coffee Maker tastes acidic (like vinegar), it might be due to improper cleaning after descaling. Clean the coffee maker multiple times as described in the “before the first use” instructions. Also, old coffee powder stored in a hot, wet place can cause this. Use fresh coffee powder, and store unused powder in a cool, dry place, resealing it tightly or refrigerating it after opening.
J
Julie DayAug 29, 2025
Why do metal parts in Hyundai Tazza Coffee Maker tank have rust?
- W
  Wayne ParkerAug 30, 2025
  The rust on the metal parts in the tank of your Hyundai Coffee Maker may appear if you are using a descaler that is not recommended by the manufacturer, as it may corrode the metal parts. Use the descaler recommended by the manufacturer. Also, empty the drip tray, as a full drip tray may contribute to this issue. If the issue persists, it may indicate a malfunction, and you should contact an authorized service facility for repair.