FEATURES OF YOUR HYUNDAI
1- 52
B700A01L-AAT
BI-LEVEL HEATING
Your Hyundai is equipped with bi-level heating
controls. This makes it possible to have cooler
air from the dashboard vents and warmer air
from the floor outlets at the same time. To use
this feature:
o Set the air intake control to the fresh air ( )
position.
o Set the air flow control at the bi-level ( )
position.
o Set the temperature control between "Cool"
and "Warm"
B690A01A-AAT
HEATING CONTROLS
For normal heating operation, set the air intake
control to the fresh air ( ) position and the air
flow control to the floor ( ) position.
For faster heating, the air intake control should
be set in the recirculate ( ) position.
If the windows fog up, set the air flow control to
the "Def" (defroster) position. (The A/C will be
on automatically and it will be changed to "Fresh"
mode.)
For maximum heat, move the temperature con-
trol to "Warm".
B690A01L
B670E02A-AAT
Temperature Control
This is used to turn the heating system on and
off and to select the degree of heating desired.
B670E01L
Cool
Warm
Face-Level
Selecting the "Face" mode will cause air to be
discharged through the face level vents.
Bi-Level
Air is discharged through the face vents and the
floor vents. This makes it possible to have
cooler air from the dashboard vents and warmer
air from the floor outlets at the same time.
Floor-Level
Air is discharged through the floor vents.
Floor-Defrost Level
Air is discharged through the windshield defrost
vents and the floor vents.
If the "Floor-Defrost" mode is selected, the A/C
will be on automatically and it will be changed to
"Fresh" mode.
Defrost-Level
Air is discharged through the windshield defrost
vents.
If the "Defrost" mode is selected, the A/C will be
on automatically and it will be changed to "Fresh"
mode.
To Next Page
Loading...
Need help?
General
