User’s Manual
19
ERROR MESSAGE & POSSIBLE SOLUTIONS
CABLE NOT CONNECTED:
1. Check that the signal-cable is properly connected, If the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORT:
Your computer has been set to unsuitable display mode, set the computer to display mode given
in the following table.
RECOMMENDED AND SUPPORTED TIMING MODE:
(Analog / Digital mode)
MODE RESOLUTION REMARK
1 640x400@56 Hz VGA
2 640x480@60 Hz VGA
3 640x480@67 Hz MAC
4 640x480@70 Hz VGA
5 720x480@60 Hz VGA
6 800x600@56 Hz SVGA
7 800x600@60 Hz SVGA
8 1024x768@60 Hz XGA
9 1024x768@66 Hz XGA
10 1024x768@70 Hz XGA
11 1152x900@66 Hz SUN66
12 1280x720@60 Hz
13 1280x768@60 Hz
14 1280x960@60 Hz
15 1280x1024@60 Hz SXGA
16 1360x768@60 Hz WXGA
17 1400x1050@60 Hz WXGA+
18 1440x900@60 Hz WXGA+
19 1600x1200@60 Hz UXGA
20 1680x1050@60 Hz WSXGA+
21 1920x1080@60 Hz
(YPbPr mode)
MODE RESOLUTION MODE RESOLUTION
1
720x480i@60Hz
6
1280x720p@60Hz
2
720x480p@60Hz
7
1920x1080i@60Hz
3
720x576i@50Hz
8
1920x1080p@60Hz
4
720x576p@50Hz
9
1920x1080i@50Hz
5
1280x720p@50Hz
10
1920x1080p@50Hz
We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee the
image quality.
To Next Page
Loading...
Need help?
General
