However if you have access to a lighting desk a quick and easy way to create multiple or complex
memories is to give the light the desired colour information using a lighting desk or similar DMX
generating device and use the STORE function.
1 Connect the light to the desk in the usual way making sure the address is correct and the lamp is in MODE 3.
2 Create the desired colour on the lighting desk.
3 Press the button underneath the MORE legend once.
4 Press the button underneath the STORE legend once.
5 You should then assign this memory a number using the
UP, DOWN buttons.
6 When you are happy this memory has been numbered
correctly press the STORE button wait 3 seconds and the
display will return to the main menu.
BB7 USERS MANUAL - PAGE 13
Stand alone functions
UP MEN 01
DOWN STORE
PRESS
MODE 3 5CH MORE
ADDR 001
PRESS
UP MEN 04
DOWN STORE
PRESS
UP MEN 04
DOWN STORE
PRESS
The BB7 is able to run in a stand alone mode without any need of data from a lighting desk. The light is
capable of outputting up to 20 programmable memories and 1 chase that steps through these memories.
“The light must be in MODE 3 (5ch) for all the stand alone functions to work.”
Storing a DMX Input as a Memory
BB 4 Washlight
BB4 USERS MANUAL - PAGE 5
The BB 4 washlight provides the user with an energy saving high power light. Four powerful light sources gives the
feel and look of a modern light fixture. LED in origin, the appearance from the four blended sources shows no
visible appearance of existing led technology yet has the performance we have all come to understand from this
novel form of light.
The BB 4 washlight, is equipped with four custom Light Engines from Lamina. It's one of the highest power point
source led light available. It is the homogenized source of the three saturate colours that makes our colour mixing
so good.
The performance of these light engines to i-pix's exacting colour specifications gives a tighter tolerance and
improved colour performance, which makes tungsten lighting performance from the BB 4 possible. Daylight
temperatures can also be found with ease and finally a fixture that does not need a nudge from amber to
compensate. The whites are believable and full of low power energy, which makes one wonder if the source is
really an led engine.
The BB 4 has a super smooth control with 16 bit resolution, enhancing the feel of the fixture when wishing to
emulate the tungsten performance you would expect from pre existing fixtures. Different operating modes ensure
ease of use. With consumption of 120 watts, the fixture draws half and amp on full @ 240 volts.
i-PIX
4
BB washlight
To Next Page
Loading...