EasyManua.ls Logo

i.safe MOBILE IS730.2 - Introduction; Reservation; Ex-Specifications; EU-Declaration of Conformity

i.safe MOBILE IS730.2
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed
without fail for safe operation of the device IS730.2 under the described conditions.
Non-observance of this information and instructions can have serious consequences
and / or may violate regulations.
Please read the manual and these safety instructions before using the device.
In case of contradicting information, the text of these safety instructions shall apply.
In case of any doubt, the German version shall apply.
The current EU-declaration of conformity, certi cates, safety instructions and manuals
can be found at www.isafe-mobile.com, or requested from i.safe MOBILE GmbH.
RESERVATION
Technical Data is subject to change without notice. Changes, errors and misprints may
not be used as a basis for any claim for damages. All rights reserved.
i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this phone.
EXSPECIFICATIONS
The IS730.2 is a device suitable for use in potentially explosive atmospheres classi ed
as zone 2/22 in accordance with directives 2014/34/EU and 2014/53/EU.
EXMARKINGS
ATEX:
II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135 °C Dc IP54
EU Type Examination Certi cate:
EPS 15 ATEX 1 036 X
CE-designation:
IECEx:
Ex ic IIC T4 Gc IP54
Ex ic IIIB T135 °C Dc IP54
IECEx Certi cate: IECEx EPS 16.0029 X
Temperature range:
-20 °C +60 °C
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
EUDECLARATION OF CONFORMITY
The EU-declaration of conformity can be found at the end of this manual.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it
must be withdrawn from use and removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device.
4
ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed
without fail for safe operation of the device
IS730.2
under the described conditions.
Non-observance of this information and instructions can have serious consequences
and / or may violate regulations.
Please read the manual and these safety instructions before using the device.
In case of contradicting information, the text of these safety instructions shall apply.
In case of any doubt, the German version shall apply.
The current EU-declaration of conformity, certi cates, safety instructions and manuals
can be found at
www.isafe-mobile.com
, or requested from
i.safe MOBILE GmbH
.
RESERVATION
Technical Data is subject to change without notice. Changes, errors and misprints may
not be used as a basis for any claim for damages. All rights reserved.
i.safe MOBILE GmbH
cannot be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this phone.
EXSPECIFICATIONS
The
IS730.2
is a device suitable for use in potentially explosive atmospheres classi ed
as zone 2/22 in accordance with directives 2014/34/EU and 2014/53/EU.
EXMARKINGS
ATEX:
II 3G Ex ic IIC T4 Gc IP54
II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135 °C Dc IP54
II 3D Ex ic IIIB T135 °C Dc IP54
EU Type Examination Certi cate:
EPS 15 ATEX 1 036 X
CE-designation:
IECEx:
Ex ic IIC T4 Gc IP54
Ex ic IIIB T135 °C Dc IP54
IECEx Certi cate: IECEx EPS 16.0029 X
Temperature range:
-20 °C +60 °C
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
EUDECLARATION OF CONFORMITY
The EU-declaration of conformity can be found at the end of this manual.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it
must be withdrawn from use and removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device.

Other manuals for i.safe MOBILE IS730.2

Related product manuals