Need help?Do you have a question about the i. Tech Dynamic Clip II and is the answer not in the manual?
General| Model | Dynamic Clip II |
|---|---|
| Connectivity | Wired |
| Driver Size | 10mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Microphone | Yes |
| Cable Length | 1.2m |
| Connector | 3.5mm |
| Color | Black |
| Type | Earbud |
Charge the headset by connecting it to an AC wall outlet.
Pair your headset with a Bluetooth-enabled mobile handset.
Follow steps to pair headset with mobile handset, including passkey entry.
Check local laws for headset use while driving; avoid airbag deployment areas.
Keep away from children, observe RF restrictions, turn off before aircraft boarding.
Check headset charge, pairing, mobile Bluetooth, and distance for connection problems.
To Next Page