I-Tech i.Oval 303 User Manual

3
4
5
5-8
8-9
9-11
12
13-14
15-16
17-20
20
Product Specifications
i.Oval 303 Overview
Getting Started
Charging Your Headset
Pairing Your Headset with a Bluetooth Mobile Phone
Using Your Headset
Factory Reset
Troubleshooting
Safety Information
Care and Maintenance
Declaration of Conformity
Contents
Bluetooth Headset
i.Oval 303
User Guide
Product Specifications
Bluetooth Specification: v2.0 + EDR Class 2
Bluetooth Profiles Supported: Headset & Handsfree
Range of Frequency: 2.4GHz spectrum
Nominal Charging Time: Within 3 hours
Talk Time*: Up to 4.5 hours
Standby Time*: Up to 90 hours
Dimensions: 1.73 (L) x 0.81 (W) x 0.44 (T) inch
Weight: 0.31 ounce
* may vary due to the user’s habit, different modes of operation, and
mobile phone settings.
1. Multi-function Button (MFB)
• Power On / Off
• Pair with mobile phone
• Answer / End a call
• Last number redials
• Voice dialing
2. Volume
• Adjust volume
• Reject / Transfer a call
3. Status Indicator
4. Built-in Rechargeable Battery
5. Microphone
6. Charging Socket
7. Speaker
i.Oval 303 Overview
5
1
3
2
4
6
7
3
4
fig.1

I-Tech i.Oval 303 Specifications

General

Brand	I-Tech
Model	i.Oval 303
Category	Headsets
Language	English

Summary

Product Specifications

Key Specifications

Details Bluetooth version, profiles, frequency, charging, talk, standby times, dimensions, and weight.

i.Oval 303 Overview

Headset Components and Functions

Identifies and explains the Multi-function Button, Volume, Status Indicator, Battery, Microphone, Charging Socket, and Speaker.

Getting Started

Initial Setup and Charging

Ensure headset is charged and paired with a Bluetooth-enabled mobile phone.

Charging Your Headset

Charging Instructions

Connect headset to charger, plug into AC outlet or PC. Use only the supplied cable.

Indicator Light

Status Indicator Guide

Details light patterns for charging, charged, low battery, out of battery, and out of range.

Talk and Standby Time

Battery Performance

Provides estimates for talk time (up to 4.5 hours) and standby time (up to 90 hours).

Pairing Your Headset with a Bluetooth Mobile Phone

Pairing Procedure

Steps to activate pairing mode, search devices, select 'i.Oval 303', and enter passcode '0000'.

Using Your Headset

Basic Operations

Details how to power on/off, answer/end calls, and adjust volume using the headset buttons.

Advanced Functions

Covers last number redial, rejecting calls, and call transfer between headset and mobile.

Factory Reset

Resetting the Headset

Instructions to reset the headset to default settings, clearing pairing history.

Troubleshooting

Common Issues and Solutions

Addresses common problems like crackling noise, no sound, and connection issues.

Hardware Reset for Unresponsiveness

Procedure to perform a hardware reset if the headset is unresponsive or cannot be turned off.

Safety Information

Driving Safety

Advises on responsible use of headsets while driving and maintaining full attention.

General Precautions

Covers warnings about small parts, electrical devices in restricted areas, and aircraft use.

Hearing and Device Safety

Warns against high volumes, modification, exposure to liquids, rain, storms, and tampering with the battery.

Care and Maintenance

Headset Care

Instructions for turning off before storage, avoiding liquids, and using gentle cleaning methods.

Battery and Charger Care

Details on battery replacement, disposal, charging, and using the correct charger.

Environmental Considerations

Advises against extreme temperatures, direct sunlight, open flames, and sharp objects.

Declaration of Conformity

Compliance Statement

Declaration by i.Tech Dynamic Limited regarding product compliance with EU directives.

Federal Communications Commission (FCC) Statement

FCC Compliance and Usage

Details FCC rules for device operation, interference, and user authority.