How to pair
3
i3ALLSYNC HDMI Touch transmitter Wired Pairing
1 Connect your i3ALLSYNC HDMI Touch TX to your receiver via USB Port.
2 Open the settings of the i3ALLSYNC receiver.
3 Select "WIFI HDMI Tx Pairing"
4 The dialog will show "wired pairing", select "next".
5 In "Pairing Data Setting", select "Pairing"
6 Provide the system access to the USB, select "OK".
7 "Transferring data for pairing", it will be paired in a couple of seconds.
8 "Successfully transfer data for pairing", the pairing process is finished with
success, just press "OK".
9 Unplug the HDMI TX and connect it to your laptop/tablet/...
10 HDMI TX is now paired and ready to use, enjoy!
i3ALLSYNC HDMI Touch transmitter Wireless Pairing
When using the i3ALLSYNC TRANSMITTER for the first time:
1. Activate the i3ALLSYNC app on your i3TOUCH or i3HUDDLE
2. Select "Setting"
3. "WiFi HDMI Tx pairing" on your i3TOUCH or i3HUDDLE
4. Press the main button of transmitter for 4 seconds. The main button will
now light up with a constantly white colour.
5. Enter your Wi-Fi password and press "pairing", while pairing the main
button will blink green, and when successful, it will stay green.
Please refer to the i3ALLSYNC receiver user manual for more information about the workflow
of the transmitter application. You can download the i3ALLSYNC receiver user manual on our
website: www.i3-technologies.com
To Next Page
Loading...
Need help?
General