i3-TECHNOLOGIES i3TOUCH E-ONE - Page 4

Time to set things up.
i3TOUCH E-ONE | SETUP
On the front right side you’ll nd the power button.
Once you’ve got the power cable connected switch on the
power supply by turning the button to the "1" position.
Connect the power cable to the power socket located at the
back right side of the display.
Multifunctional button
Touch 1
HDMI 2
LAN
HDMI 1
USB-C
HDMI OUT
Touch 2
USB ports
USB ports
RS-232
Power
USB-C
HDMI